Make snow at home with this snowmaking nozzle kit!
Looking for a fun winter DIY project? Want to make snow, but are on a budget? Make snow in your own backyard with our nozzle kit, designed to help you build your own home snowmaking machine! Snow State’s nozzle kit makes it easy for many people to make snow, eliminating the guess work of DIY systems while keeping the cost low.
- You are a tinkerer or DIY enthusiast who is new to snowmaking
- You want to try making snow, but have a small budget
- You’ve tried building your own snow gun in the past, but it has been unsuccessful
- You’re looking for a fun winter project to do with family or friends
What’s included?
- Six (6) misting nozzles – ensuring you can maintain the correct operating pressures at all times.
- An operation guide with plans for your home snowmaking machine.
- Lifetime customer support – we are here to answer any questions you have about snowmaking!
What else will I need?
- An air compressor and pressure washer – we can offer suggestions.
- Recommended air compressor specs: rated for at least 5 cfm @ 90 psi.
- Any electric pressure washer or pump capable of delivering at least 500 psi.
- Some pipe fittings (can be found locally) – we tell you what to buy!
- Sub-freezing outdoor temperatures – snowmaking weather chart included with purchase!
What size air compressor do I need?
For a do-it-yourself build with this kit, plan on a compressor rated for at least 5 CFM at 90 psi. That’s higher than the Snow Squall‘s 2 CFM floor, because with a homemade gun a small compressor makes it much harder to get the nucleation mixture right. When you shop, look at the CFM at 90 psi rating, not the tank size or the max PSI. If your compressor is under 5 CFM, the Snow Squall is the better fit.
What’s included in the Snowmaking Nozzle Kit?
Six flat fan nozzles: one nucleator nozzle sized for a compressor of about 5 CFM, plus five bulk nozzles to choose from. You also get an operation guide with plans for your home snowmaking machine, and lifetime customer support. The kit is $54 with free shipping.
What else will I need?
An air compressor rated for at least 5 CFM at 90 psi, and any electric pressure washer or pump capable of delivering at least 500 psi. You’ll also need some pipe fittings, which you can find locally; the guide tells you what to buy. And you’ll need a night cold enough for snowmaking, below about 28°F wet bulb. A weather chart is included with the purchase.
How do I choose which nozzles to use?
I aim for about 750 psi at the nozzles. A bulk water nozzle’s size number divided by 10 is its flow in GPM at 40 psi, and flow goes up with the square root of pressure. At 750 psi, the bulk nozzle sizes should add up to about 2.3 times your pressure washer’s GPM. For example, a 1.2 GPM washer needs a total of about 3 (a single 03, for example). Bulk nozzles are 25° or 40°: the 40s spray wider and the 25s a little narrower, so pick based on the coverage you want. The nucleator in the kit is a 65° nozzle sized for about a 5 CFM compressor. The operation guide walks you through this, and you can also use our nozzle calculator. If you’d rather not do the math, the Snow Squall is configured for your CFM and GPM at checkout.
Will my compressor keep up, or will it cycle on and off?
The nucleator in this kit is sized for a compressor of about 5 CFM, so the compressor should run continuously and hold pressure. If your compressor is cycling on and off, reaching its cut-out pressure and shutting off, the nucleator is too small for it. Don’t regulate the air down; let the compressor run. If you have a larger compressor and it’s cycling, contact me and I can help you pick a larger nucleator from the individual snowmaking nozzles.
How cold does it have to be to make snow?
The wet bulb temperature needs to be below about 28°F, and ideally it stays there nearly all night. Wet bulb takes humidity into account, so on a dry night you can sometimes start with the thermometer reading a little warmer than that. Right around the threshold the snow is slushy. Colder temperatures mean better production: once you get into the low 20s and below, the snow turns powdery and piles up much faster. A weather chart is included with the kit, and you can also use our wet bulb temperature chart.
More questions? See the Snowmaking FAQ.



Reviews
There are no reviews yet.